knitting Sanforizng machines

This sanforizing machine is used to all the natural fibers. The water shrinkage is below 5%.

Machine characters

uInfra-red centering infeed device, correct the fabrics movement pathautomatically(shanghai brand)

uEquip weft correct adjusting roller, cooperate with the stenter frame pin plate, with a different speed to correct the fabrics weft.

uPneumatic edge spreader(teeth spreader is optional) to flat the curled edges.

uFar infra-red auto edge detector and tracing system made in Shanghai, which can guarantee the fabrics pin on correctly, the width of the pin can be controlled in minimum .

uThe wool brush wheel overfeed and pin on, right side and left side are driven by the separately motor, controlled by the inverter, overfeeding rate is -20%---+30%.

uThe chain copies Hercules of Germany.

uThe right and left stenting frames are driven by the separately motor, can movement with the little different speed, cooperate with the weft straighter to correct the weft.

uIn front of the stenter frame and felt compacting unit, equip two steaming box made of stainless steel, the stenter frame steaming box equips air curtain in front side to block off the steam dissipation, which can guarantee the edge detector works normally(not disturb by the steam).

uTwo pieces of thicken felt(20mm),the felt is used to compacting and setting, especially for open width fabrics,material is Du pont Nomex.

uDrying cylinder Heated byelectric thermal oil (steam is optional), intelligent control. Temperature tolerance is +_3°C.

uThe fabrics output by plaiting mode.

uEquip synchrocontrol devices, can harmonize the proportional speeds of each units automatically.

uAdjust the speed of the machine by inverter, HIM operation system. PLC programme controlled.

knitting Sanforizng machines